Come entrare nel BIOS senza spegnere il PC?

by

If you have a laptop, follow these steps to access the BIOS configuration screen:

  1. Press and hold the F2 key on your keyboard.
  2. While holding the F2 key, press the power button without releasing the F2 key.
  3. The message "Press F2 to enter setup" should appear in one of the corners of the computer’s initial screen.

You can access the BIOS using the Windows Command Prompt by following these steps:

  1. Type "CMD" in the search box.
  2. Choose CMD or Command Prompt.
  3. The Command Prompt window will open.
  4. Enter wmic bios to get the Smbios version.
  5. Press Enter.

After restarting your computer, follow these steps to access the UEFI firmware settings:

  1. Go to the Troubleshoot tile.
  2. Choose Advanced options.
  3. Select UEFI Firmware Settings.
  4. The UEFI settings screen will appear after the computer restarts.

If you are using a desktop computer, completely shut down the computer and wait for five seconds before restarting it. When you see the boot menu, press the Esc key multiple times. To access the BIOS setup utility, press the F10 key.

To access the BIOS in Windows 11 using the Windows Terminal, follow these steps:

  1. On the "Choose an option" screen, go to Troubleshoot.
  2. Select Advanced options.
  3. Choose UEFI Firmware Settings and click Restart.
  4. After the restart, the computer will directly enter the BIOS.

To reset the BIOS on your computer, follow these steps:

  1. Press and hold the Ctrl and Esc keys on your keyboard.
  2. Connect the AC power cable to the notebook.
  3. After seeing the BIOS recovery screen, release the Ctrl and Esc keys.
  4. In the BIOS recovery screen, choose Reset NVRAM (or Reset NVRAM, if available) and click Enter.

To update the BIOS using the Command Prompt, follow these steps:

  1. Open the Command Prompt.
  2. Type "Prompt dei Comandibios".
  3. If you want more information, click "Start".
  4. Type "Run" (or press the Windows + R keys simultaneously on your keyboard to directly open Run).
  5. Type msinfo32.
  6. Click "OK".

To reset the motherboard BIOS using the BIOS interface, follow these steps:

  1. Enter the computer.
  2. Continuously tap the F2 key until the "Entering Setup" message appears.
  3. Restore the default factory settings of the BIOS.

In this case, the BIOS reset button is usually located at the bottom of the screen and is connected to a key (e.g., F9). To reset the default BIOS values on your computer, simply press the function key on the keyboard and then select "Yes" to confirm your choice.


Leave a Comment