Come aprire un file txt da cmd?

by

To start an application on Windows 10, follow these steps:

  1. Click on the Start icon located at the bottom right corner.
  2. Select "All Apps" from the menu that appears.
  3. The sidebar will display a list of all the installed applications on your PC.

To access the BIOS of your computer, follow these steps:

  1. Usually, the keys F2, F10, or Delete are used to access the BIOS.
  2. Look for a message on the initial screen of your computer that says "Press F2 to enter setup" or something similar.
  3. Press the corresponding key to access the BIOS.

If you are using a desktop computer, follow these steps:

  1. Turn off the computer completely.
  2. Wait for five seconds.
  3. Turn on the computer and repeatedly press the Esc key.
  4. The boot menu should appear.
  5. Press the F10 key to access the BIOS configuration utility.

An alternative method to restore Windows 10 using the command prompt is available:

  1. Open a command prompt with elevated privileges.
  2. Type "systemreset -cleanpc" and press Enter.

If your computer does not start correctly, you can boot it into recovery mode and choose "Troubleshoot" and "Reset this PC" to restore Windows 10.

To clear RAM using CMD, follow these steps:

  1. Press the Windows key and search for "Command Prompt".
  2. Right-click on "Command Prompt" and select "Run as administrator".
  3. In the command prompt window, type "C:" and press Enter.
  4. Type "DIR/s" and press Enter.
  5. Wait for the process to finish.

To clean a Windows 10 computer, follow these instructions:

  1. On the taskbar, search for "Disk Cleanup" and select "Disk Cleanup" from the results.
  2. Choose a drive to clean and click OK.
  3. Select the types of files to delete in the "Files to delete" section.
  4. Click OK to confirm.

Manual recovery of temporary files:

  1. Use the search bar in File Explorer to find "tmp" and ".temp" files in the C: drive.
  2. If you are using Chrome, click on the three-dot icon, go to "More Tools", and choose "Clear browsing data" to remove temporary internet files.

To access the command prompt, follow these steps:

  1. Open the Run dialog box.
  2. Type "cmd" and press Enter.

Alternatively, you can access the command prompt by searching for "Command Prompt" in the Start menu or by navigating through the Start menu, selecting "All Apps", choosing "Windows Tools", and then accessing the command prompt.


Leave a Comment