Come collegare la stampante HP al cellulare?

by

To connect your device and printer to the same Wi-Fi network and print a document, follow these steps:

  1. Open the document you want to print.
  2. Click on the "Share" button.
  3. Select the "Print" option (the icon is located at the bottom left).

To enable Wi-Fi Direct connection on an HP printer, follow these steps:

  1. On the printer’s control panel, locate the HP Wireless Direct icon (HP Wireless Direct Icon).
  2. Alternatively, select the "Wireless Settings" or "Network Configuration" menu, and then click on "Wireless Direct" to activate the connection.

To disable the Privacy Separator on a router, which prevents communication between wireless devices through a mobile router to enhance security, follow these steps:

  1. Enter the router’s IP address in the browser’s address bar to disable WPS.
  2. Go to the authorization page and enter your username and password.
  3. Navigate to the router’s settings page and choose "Wireless" → "WPS".
  4. Click on "Disable".

To close an open connection, follow these steps:

  1. Go to the "Network and Internet" section.
  2. Navigate to the "Network Connections and Sharing Center".
  3. Right-click on the network card (LAN or Wi-Fi) and select "Disable" from the context menu.

To check if WPS is enabled on your Android device, follow these steps:

  1. Go to the network settings.
  2. Select "Wireless" and then "WPS".

To use WPS on a Samsung device, follow these steps:

  1. On the control panel, press the "Menu" button and choose "Network".
  2. Activate the Wi-Fi network.
  3. Use WPS instead of PBC.
  4. On the access point or wireless router, press the WPS button (PBC).
  5. Follow the on-screen instructions displayed on the screen.

To find the SSID of your Android smartphone, follow these steps:

  1. From the app menu, select "Settings" to access your smartphone’s SSID.
  2. Select "Wi-Fi".
  3. Locate the network name marked as "Connected" in the list of available networks. This identifies the SSID of your network.

If your smart TV cannot connect to the Wi-Fi network, follow these steps:

  1. Check the signal and Wi-Fi connection of the smart TV.
  2. Pay attention to the modem/router.
  3. Restart the TV or the modem.
  4. Consider alternative solutions to protect smart TVs and modems from power surges.
  5. Refer to the FAQ section for more assistance.

If your TV is unable to connect to the internet, try the following steps:

  1. Restart the router.
  2. Wait for about a minute before reconnecting the power cable.
  3. Try connecting another device to the router.
  4. If the TV works, the issue is with the TV. If it doesn’t work, the issue is with the router.

Leave a Comment