Come si resetta il joystick PS4?

To complete the process, follow these steps:

  1. Turn off the PlayStation 4.
  2. Press and hold the reset button on the controller for 5 seconds.
  3. Connect the controller to the console using a USB cable.
  4. Turn on the PS4 and press the PlayStation button to start it.

If your PS4 controller is not working properly, you can reset and resynchronize it to resolve the issue. Here’s what you should do:

  1. Disconnect the PS4 controller from the console and turn it off.
  2. Press and hold the reset button on the back of the controller, near the L2 button, for 5 seconds.
  3. Use the original USB cable or a compatible one to connect the controller to the console.
  4. Wait for a few minutes.

How to Pair a PS4 Controller

To pair your PS4 controller with the console, simply follow these steps:

  1. Turn on the console.
  2. Connect the controller to the console using a USB cable.
  3. The pairing will happen automatically, and you can use the controller wirelessly after it’s charged.

Xbox Controller Pricing

A wide selection of prices for the Microsoft Xbox One wireless controller is available, starting from €6.99.

Connecting Xbox 360 Controller to Phone

To connect an Xbox 360 controller to a phone without using a cable, follow these steps:

  1. To enable Bluetooth on the Xbox controller, press the black button next to the L and LT buttons.
  2. First, make sure that your phone is Bluetooth-enabled.

Troubleshooting a Non-responsive Joystick

If your joystick is not responding, try the following steps:

  1. Remove the analog sticks.
  2. The main cause of this problem is the accumulation of dust and dirt.
  3. Cleaning the analog sticks sometimes solves the issue of the self-guided controller.

Why is the Joystick Not Working with the PlayStation?

If the joystick is not connected to the PlayStation, you need to reset the controller. Here’s what you should do:

  1. Remove the PS4.
  2. Insert a pin into the small hole near the L2 stick on the controller while holding the reset button for a few seconds.

Meaning of a Powered-Off PS4 Controller

The white light that illuminates on the PS4 controller mainly indicates two things: either the batteries need to be recharged or replaced with those from another controller, or the battery is low. Additionally, the PS4 controller is trying to interact with the PlayStation 4 but is unable to do so.

Resetting a Nintendo Switch Controller

To reset the Nintendo Switch controller, follow these steps:

  1. Remove the controllers from the console by pressing the SYNC button on the side.
  2. Disconnect the power supply from the console and unplug it from the power outlet.
  3. Wait for 30 seconds and then reconnect it to the power outlet.

Updating a PS4 Controller

To update the firmware of your PS4 controller, follow these steps:

  1. Insert the USB drive into a USB port on the controller.
  2. The controller will automatically detect the firmware file and display the update screen.
  3. Click on the "Go to Update Manager" button.
  4. You can choose to wait before installing the update.

Leave a Comment