Cosa fare se il controller Xbox 360 non funziona?

by

If your Xbox 360 controller is not functioning properly, it may need to be reset. Here are the steps to reset the controller:

  1. Press and hold the connection button on the front side of the console for 30 seconds. This will keep the console powered on.
  2. The Xbox lights should flash and then turn off completely.

There are different methods to reset an Xbox controller depending on the model of Xbox One you have. Here are the steps:

  1. Press and hold the Association button on the front of the controller until the Xbox button starts flashing.
  2. Locate the Association button on the side or front of the console (depending on the Xbox One model you have).

If your Xbox controller is turning off or not functioning properly, follow these steps to restart and reset your console:

  1. Press and hold the Xbox power button for 10 seconds until the console turns off.
  2. Disconnect the power cable from the power outlet.
  3. Wait for twenty minutes.

If the joystick on your Xbox controller is not working properly, it may be due to a short circuit in the cable or a disconnected micro-USB port and battery. Here’s what you can do:

  1. Check that all other cables are properly connected and repair any loose connections.

There are 73 offers for Xbox 360 controllers starting from €5.01. The reset button is located near the L2 button, in a small hole on the back of the controller. Press and hold the Reset button with a paperclip for a few seconds (7-12 seconds). This should be enough to reset the controller.

To reset the controller, follow these steps:

  1. On the back of the controller, next to the L2 button, you will find a small reset button.
  2. Use a small tool to press the button inside the hole.
  3. Hold the button for about three to five seconds.

To reset a wireless controller, use a paperclip and insert it into the hole for at least ten seconds. Then, turn on the platform and connect the controller using the cable.

To configure an Xbox One controller, follow these steps:

  1. Go to the Xbox settings.
  2. Select "Reset and remove everything," "Reset and keep my games and apps," or "Delete."

Remember to register your console to replace a controller under warranty.


Leave a Comment