To fix a PS4 controller that won’t charge, follow these steps:
- Try using an alternative USB cable.
- Connect the USB cable to a different device other than the PS4.
- Inspect and clean the charging port on the controller.
- Reset the PS4 controller.
- Increase the PS4’s power.
On the back, near the L2 button, there is a small reset button for the Dualshock 4. Try holding it down for a few seconds with a toothpick or needle.
Last resort: Hold down the PS button for 10-15 seconds.
When the console is not functioning or the battery is about to die, the joystick flashes white. There are some simple actions you can take to resolve the problem, and each action is listed below.
A yellow light that has not been released occurs when the PS4 is in rest mode or turned off, and the controller has just been connected to charge.
What does it mean when the yellow flashing on the joystick appears? When the yellow flashing occurs on the joystick, it means that the joystick’s battery is low. Fully charge the battery to resolve the issue. Wait for three hours or until the battery LED turns green. Was this information helpful to you?
Contact the manager.
Go to the Settings section of your Android device.
Enable Bluetooth.
Select what interests you, then the controller.
The second method is undoubtedly simpler: The gamepad will be automatically recognized after connecting a USB cable to the PC.
You need to purchase an adapter, which costs about 50 euros on e-commerce sites, to connect it via Bluetooth.
Native support for some PS4 and PS3 controllers, including a wired DualShock controller, is present in Windows 10.
Connect the controller to the USB port of the system.
Wait for Windows 10 to detect the device before installing the related drivers.
The device is ready, and you will receive a message.
Show the Bluetooth on your device.
Hold down the PS button and the Share button on the pad until the LED starts flashing.
Search among the devices detected by Bluetooth for the pad.
Enjoy.
Choose Accessibility, Controller, and Vibration Settings.
If you have multiple controllers, choose the one you want to modify and click Configure.