If you are using a computer with Windows, you can find the equalizer by going to the View menu and then clicking on Show Equalizer in the top left corner. Select the Active option in the window that opens. Then, choose one of the presets from the dropdown menu.
To equalize the audio of Windows, go to the Sounds tab in Windows and double-click on the speakers in the Playback tab to equalize the audio. To get a more powerful sound, go to the Enhancements tab and select the Audio Leveling option.
This is the best way to adjust the bass in Windows 10. Right-click on the Volume button when you go to the taskbar. Choose Audio Settings. A tab with audio settings will open. Scroll down to access the relevant settings.
Simply go to the computer settings and choose Accessibility and Audiovisual Content. You can select Mono Audio, which provides the same output for both channels, or Balance, which allows you to adjust the stereo.
To the right of the Settings option, click on the button with three dots "…" to access the equalizer in Windows 10. This will open a graphical equalizer. Here, you will be able to adjust each individual frequency range using the available sliders.
Windows 10 does not include an equalizer, which is normally provided by the audio console installed with the integrated chip drivers of the motherboard or dedicated sound card. How to best adjust an equalizer considering this? All EQ sliders should be set to 0 or in the center position. The sound will be reproduced by the speakers in this way without any additional audio effects. If adjustment is needed, listen to the sound from the speakers.
If the amplifier is equalized, check the knobs on its top. The knobs are labeled as "bass", "mid", and "treble" instead of "low", "mid", or "high" under a section called "EQ" or "equalization". Adjust these knobs to achieve the desired sound.
Select MODE/TRIM. The unit enters LEVEL CONTROL mode. If the slave link unit is connected via FCBS, this button can be pressed to change the volume balance (LEVEL) and sound quality (BASS/TREBLE).
To access these settings, go to Settings, Additional Settings, Headphones, and Audio Effects. Move the switch corresponding to the Mi Sound Optimization option to On. Then, select the type of headphones in use and press on the Equalizer option.