Perché non funziona il joystick sul PC?

If your joystick is not connecting even though Bluetooth is on, it could mean that the computer cannot be identified or that the physical switch on the laptop is off. The wireless joystick must have new and charged batteries and a range of at least 8 meters from the PC.


To connect the joystick, simply turn on the console and connect the pad via USB cable. You can use the joystick in wireless mode after charging because the pairing is completely automatic.

To connect and use the PS4 controller on a computer, you need to use the micro USB cable provided with the console. Due to a conflict with the internal speaker of the controller, the computer may recognize it as an audio device once connected.

If the joystick is not connected to the PlayStation, the first thing to do if your PS4 does not recognize the controller is to reset the controller. To do this, you must first turn off your PS4. Now insert a needle into the small hole near the L2 lever, pressing the reset button under the controller for a few seconds.

If the PS4 controller is not working properly, on the back of the controller, next to the L2 side button, you will find a small reset button. To press the button inside the hole, use a small tool. Hold down the button for about three to five seconds. Press the PS4 button to connect the controller to the PS4 console.

If the joystick is flashing and not turning on, it may be due to a power or battery problem. First, try connecting the controller for at least thirty minutes or two hours if you haven’t used it for a long time or if it has been completely discharged.

To install the PS4 controller on Windows 10, access the Windows control panel and select Bluetooth devices. You will find your controller in this section and click on "pair" to complete the process.

People also ask: How do I reset a joystick? The reset button is located near the L2 button, in a small hole on the back of the controller. Using a paperclip, press and hold the reset button for a few seconds (7-12 seconds). This should be enough to reset the controller. How do I reset the PlayStation 4 joystick? To reset the PlayStation 4 joystick, turn off the console and hold down the reset button on the controller for 5 seconds. Then, using a USB cable to connect the pad to the PS4, start the console and press the PlayStation button.

Therefore, how do I connect the PS4 controller to the PlayStation? How to connect the DualShock 4 to the PlayStation 4? Using a micro USB cable to connect the controller to the console, turn on the PlayStation 4 and press the PS button on the controller. You can use the controller in wireless mode by removing the cable when the indicator light turns on.


Leave a Comment